You will find two techniques for resetting the "service engine soon" light on the Nissan Altima. One way, the easiest, is by using a Launch CReader VI scanner, which you'll purchase at any auto parts store. The code scanner displays the codes instantly and it has an associated code sheet. There's additionally a manual method to display the codes and totally reset the pc -- you have to access a code sheet the decipher the codes. The problem codes should be fixed just before resetting the pc, since the light will just return on as lengthy because it sees the failure.
Tugging The Codes Having a Code Scanner
1
Plug the code scanner's connect the aboard diagnostics port underneath the dash, left from the steering column. Turn the important thing towards the "On" position, without beginning the vehicle.
2
Press the "Read" key around the CARPROG FULL V4.1 scanner, and it'll start to display all of the codes. Take note of the codes for mix-reference. All codes are formatted, so that they display instructions then four amounts.
3
Mix-reference the codes using the code sheet. This is often available on-line or in an auto parts store. Repair all problems symbolized through the codes.
4
Turn the ignition answer to the "On" position, without beginning the vehicle. Press the "Erase" answer to erase the codes and totally reset the pc.
Tugging The Codes With no FGTech Galletto 2 Scanner
5
Turn the ignition answer to the "On" position, without beginning the engine. Wait three seconds. Depress and release the gas pedal five occasions in five seconds, then allow the pedal up. Count seven seconds after which depress the gas pedal and hold it lower for ten seconds. The moment the service engine soon light begins flashing trouble codes, allow the pedal up.
6
Take note of all of the codes by counting the flashes. For instance, when the light will expensive four occasions consecutively and pause for any second and start flashing again, the very first four flashes are a symbol of the amount 4 it'll start to another number.
7
Mix-reference these number codes having a code sheet. Repair all of the problems before resetting the pc.
8
Totally reset the pc and switch the service engine soon light off by repeating the very first process completely, with one exception: Once the pedal is lifted after pressing the pedal lower for ten seconds and also the codes are flashing, depress the pedal again for the next ten seconds and also the computer will totally reset.
/fdata%2F4388160%2Favatar-blog-1225482425-tmpphpuYeah5.jpeg){kind=avatar}