keyboardsale's name

When we accidentally spilled on laptop computer keyboard soft drinks, fruit juice, or other viscous material, it is easy to become very sticky. However, a tough notebook computer keyboard, can be trouble. When you enter an important password or login information, you can easily make mistakes. Also, if you use e-mail or online chat, backspace by letters can be annoying. In fact, these issues, we can clean, laptop computer services without the confusion, or in addition to the laptop keyboard. Just follow the tips below, I use my Dell OC569K keyboard.

First, prepare some tools such as durable paper towel, tweezers, or rags, etc., which will greatly help your cleaning process.

Second, ensure the correct and fully open the laptop. Then unplug it from the wall or the back of the laptop. Out of the laptop's battery, the notebook cool. A cloth with very hot water wet. Be careful, do not burn your hands or fingers with water. Out of the water as much as possible. Should be slightly damp cloth.

The Toshiba Laptop Keyboard cloth and then wipe. Press gently, but cover all of the keys are sticky. About two or three minutes to wipe area. Slightly damp and heat will dissolve the sugar substances. Moist paper towels carefully sustained. This is more expensive and not easy to RIP. Again, wring out excess water. To clean between the keys, the use of forceps.

Viscous material in the tissue. Towel forceps gently to the side. By rubbing between the keys and the fourth. Do not force tweezers. If it does not slip easily between the keys, to find a smaller tool. For example, eyeglasses screwdriver or small paper work. Clean between the keys, not to tear the tissue. Finally, remove the towel. Use a second cloth to wipe your laptop keyboard any water. Press, gently rub. Wait about an hour before you open your laptop. This is to ensure, if your laptop's hardware to get any water, will not be compromised.

In five minutes, I believe, Toshiba Satellite C650 Keyboard become completely clean, not sticky, not dirty.

The top cover of a Toshiba Tecra M9 is located directly above the laptop keyboard. Gateway refers to this cover as the "keyboard cover" or the "keyboard bezel." If this cover becomes damaged, it can be removed and a replacement can be installed in its place. There are two notebook models in the Toshiba Tecra M9 series, but the process for replacing the top cover is the same for both.


        1

        Turn the computer off. Disconnect the power cable.
        2

        Turn the computer over and remove the battery by sliding the release latch in the "open" direction indicated. Lift the battery out and up.
        3

        Turn the computer over so it is face up. Open the notebook.
        4

        Insert the tip of a flat head screwdriver into the bottom of the Toshiba Tecra M9 Keyboard cover directly above the key on the keyboard. With the screwdriver in place, gently twist it back and forth to pry the cover off.
        5

        Slide the left end of the replacement Toshiba Laptop Keyboard cover into place. Press the right side of the cover straight down into place.
        6

        Press down on the middle of the keyboard cover and on the right end. Each area will click into place.

Daily use, the Toshiba Laptop Keyboard and screen to establish dust, dirt, fingerprints and residues. Sophisticated electronic components and products need special care to prevent damage while cleaning. Harsh chemicals such as ammonia-based cleaners may damage the LCD screen surface, it is recommended to use plain water or LCD cleaner. Most keyboards have exposed parts of the cleaning agent can drop the internal electrical components. Use isopropyl alcohol to clean keys. Quickly evaporate, leaving little chance, drip irrigation system within.

     Laptop screen
         1

         With a soft, dry cloth to gently wipe the screen.
         2

         LCD cleaning spray or cloth moistened with water spray screw out.
         3

         Gently wipe the screen to remove fingerprints and debris. Allow it to completely dry air, and then close the laptop.
     Laptop keyboard
         1

         Shut down the computer.
         2

         Vacuum and brush gently to remove loose debris Toshiba Laptop Keyboard accessories and dirt.
         3

         With isopropyl alcohol soaked cloth keyboard, touchpad, and any other components with a cloth. Do not use alcohol, saturated keyboard.
         4

         Immersed in alcohol swab and clean between the keys and cracks. Let dry air, and then close the Toshiba Laptop Keyboard.

Laptop "keyboard failure" usually because the circuit board or a conductive plastic on the dirt, making between the two can not properly connected. But does not rule out other factors, such as the keyboard plug is damaged, circuit problems, damage to the motherboard, CPU is not working properly, etc., but not the main reason. Therefore, we can only work for descaling. 

The steps are as follows: 

1. Open the keyboard. Note that when you open the keyboard, be sure to button surface (that is, our operating side) down, board up, or conductive plastic on each key would have come off, you repair trouble. 

2. Open circuit boards, circuit boards are generally made of soft plastic film, is inscribed with key cable, preferably with a concentration of alcohol in 97% cotton (75% alcohol cotton can, because I had used However, it is best to use high concentrations of alcohol, cotton) and gently scrub two times in the circuit board. Key part of the line for the failure to take care of more than a few times. 

3. View key failure part of the conductive plastic, if the above accumulated a lot of dirt, the same use of alcohol scrub. Assuming conductive plastic is damaged, then I suggest you can not key on the conductive plastic used for the damaged part, although this "shattering" initiatives can not play all the Toshiba laptop keyboard functions, but the most at least you can extend the life of commonly used keys. 

4. Corner of the keyboard clear of dirt, brush tool available, small brush, etc., but to pay attention to some of the action should be gentle. 

5. Check whether the module is soldered or welded sealing off, you can repair welding work (using conductive silver paint and other tools, please refer to the following section the specific repair laptop keyboard repair instance). 

6. Installed keyboard. It should be noted here that we have to wait for alcohol to evaporate before