How you can Read Codes around the 2000 Jeep Grand Cherokee

Read the codes in your 2000 Jeep Grand Cherokee utilizing an On-Board Diagnostics II (OBD II) scan tool. It could be bought from the auto parts store. Sensors within the Cherokee identify malfunctions and send trouble codes towards the OBD II computer. The pc then illuminates warning or service lights around the instrument panel. The pc will store these codes before you retrieve all of them with your scan tool. The J2534 Pass-Thru  tool may also be used to totally reset the codes and switch from the service and warning lights once you are finished making repairs.

        1

        Discover the trapezoidal-formed diagnostic link connector, that is situated left from the controls around the dash. Plug the OBD II scanner into this port.

        2

        Place the Mvp Auto Key Diagnostic in to the ignition and switch it towards the "ACC" position. Make certain you do not start the engine.

        3

        Switch on the scanner and wait although it retrieves the codes. On some scanning devices you have to press an order like "Retrieve Codes." Either in situation, eventually it'll display alphanumeric codes on its screen.

        4

        Write lower the codes on the sheet of paper. Lookup the codes within the scanner's operation manual. This provides you with the precise concept of each code.

        5

        Unplug the Autocom CDP Pro scan tool in the port and switch from the vehicle.

Tips & Alerts

    Seek advice from the local auto parts store to try to borrow its scanner free of charge. Most stores offer this particular service.